Payment & Shipping Terms:
|Keywords:||Components For Plastic Moulds||Material:||Bronze|
|Apply For:||Plastic Moulds||Size:||Customizable|
cam wear plate,
bearing slide plate
JESW Oilless Wear Plate Standard Components For Plastic Moulds Non-Pollution
1. Product Description
JESW Oilless Wear Plate Standard Components For Plastic Moulds Non-Pollution is based on brass.A high performance solid lubricant with graphite or MoS2 solid lubricants.It breaks through the general bearing lubrication by oil film limitations.In the process of use, through the friction heat to make the solid lubrication and shaft friction, the formation of oil, powder co-lubrication excellent conditions, not only protect the shaft from wear, and make the solid lubrication characteristics eternal.Its hardness is higher than average copper sleeve one times, at the same time, it can adapt to different environmental conditions so that it can be used without refueling maintenance.
|Basic material||CuZn25Al5Mn4||Dynanic load||100N/mm²|
|Base hardness||HB>210||Friction Coef||<0.15|
|Temperature Max||250℃||Speed limit||
dry 0.5m/s oil 5m/s
3. Applicationhydraulic machinery,
JESW Oilless Wear Plate Standard Components For Plastic Moulds Non-Pollution are widely applied in plastic moulds,mining machinery etc.
This oilless wear plate is suitable for the position where the lubricating oil must be used frequently, the position where reciprocating motion or frequent starting or stopping, and the place where it is difficult to form oil film,can be used in the state of self-lubrication, no need for refueling device, can shorten the assembly period, reduce the pollution of lubricating oil, environmental protection and beautify the social environment. It with the excellent wear and bite resistance.
Contact Person: Mr. Hang