Product Details:
Payment & Shipping Terms:
|
| Keywords: | Centrifugal Casting | Material: | Bronze |
|---|---|---|---|
| Apply For: | Hoisting Machinery | Size: | Customizable |
| Feature: | Size Stability | Advantage: | High Load |
| High Light: | thin wall bushings,wrapped bronze bearing |
||
Centrifugal Casting Bronze Sleeve Bearings With Oil Grooves Brass Bushings
1. Product Description
Centrifugal Casting Bronze Sleeve Bearings With Oil Grooves Brass Bushings based on high-strength brass lubricated by the addition of oil in the groove, which has the same performance as the tin bronze bushing but has a much higher hardness, the service life for low speed application is twice that of the tin bronze bushing. It can be used under heavy load conditions.According to different customer requirements, according to ASTM, DIN, BS, UNS, SAE etc.bushing and China GB standard production of all kinds of bronze, brass bushing, plate and rod products.All products are made of electrolytic copper by centrifugal casting, continuous casting and extrusion sliding bearings.
2. Specification
| Basic material | CuSn25AL5Mn3Fe3 | Friction | Oil Lubrication | 0.07μ |
| Density | 8.0g/cm³ | Dry Friction | 0.12 μ | |
| Heat-conducting Coefficient | 30~50(w/m.k) | Tensility | ≥5% | |
| Tensile Strength | ≥750 N/mm2 | Working Temperature Limits | -40℃~+300℃ | |
| Anti-impact Tenacity | ≥400-500 KJ/m3 | Max Load Pressure | 100N/mm2 | |
| Hardness | ≥210HB | Max Linear Velocity | 0.25 m/s | |
| Flexibility Coefficient | 120-160 KN/mm2 | Max PV Value | 3.0N/mm2.m/s |
|
3. Application
Centrifugal Casting Bronze Sleeve Bearings With Oil Grooves Brass Bushings are widely used in heavy duyty equipment,hydraulic machinery,loading machine,military enterprise etc.
4. Advantages
The bushing with wear resistant and corrosion resistant, suitable for forging materials and with high hardness, excellent wear resistance, not easy to bite dead appearance, good forging and cutting function, in the atmosphere and fresh water has good corrosion resistance.It can be used for wear-resistant parts under high load (below 20Mpa) and high sliding speed (8m/s), such as connecting rod, bushing, bearing bush, gear, worm wheel, etc.with long operating life.
Contact Person: Mr. Hang
Tel: 86-13616738224
Fax: 86-573-84614510
